Biomedical equipment management software for hospitals and service companies
Biomedical equipment management software that knows where every infusion pump, monitor, ventilator and imaging system is, when it was last maintained and tested, who repaired it with which parts, and whether a field safety notice applies to it. We build custom medical equipment maintenance management software for clinical engineering departments, hospital groups and medical equipment service companies, hosted in the EU, and your organisation owns the code.
- You see the result before it goes live
- Fixed price for the agreed scope, in writing before work starts
- Source code, domain and accounts in your company's name
Why medical equipment needs its own maintenance system
Our field service management software page covers technicians on the road in general, and our preventive maintenance scheduling software page covers planned maintenance of plant and facilities. Medical equipment raises the stakes on both. Devices move between wards and sites, so the inventory is only as good as its location data. Maintenance follows the manufacturer's instructions and the organisation's risk policy, and both must be traceable. Electrical safety and performance tests produce measurements that decide whether a device goes back into clinical use. And field safety notices and recalls must reach every affected device, wherever it is.
Many departments run this on an older CMMS, spreadsheets for contracts and recalls, and test results stored as files on a shared drive.
What the system does
- Device inventory. Every device with asset number, serial number, model, manufacturer, location, owner department, purchase date, end-of-life date and full history. Consumables and implants are covered by medical inventory management software.
- Planned preventive maintenance. Tasks and intervals per model from the manufacturer's instructions, adjusted by usage, environment and risk.
- Safety and performance tests. Test procedures per device class, results recorded or imported from analysers, limits checked.
- Repairs. Fault reports from wards, work orders, parts, external repairs and return to service.
- Service contracts. Manufacturer and third-party contracts per device, with coverage, response times and costs.
- Field safety notices and recalls. Affected devices found by model and serial range, actions assigned and closed.
- Training records. Who has been trained to use which device types.
- Replacement planning. Age, repair cost, availability of parts and support used to plan replacements.
What regulators and guidance expect
In the United States, the hospital Conditions of Participation require that facilities, supplies and equipment be maintained to ensure an acceptable level of safety and quality, and that the hospital maintain written evidence of regular inspection and approval by state or local fire control agencies (42 CFR 482.41, read on 12 November 2026). Accrediting bodies set their own standards on medical equipment management on top of that.
In the UK, the MHRA's guidance Managing Medical Devices (January 2021) says device records should provide evidence of a unique identifier for the device where appropriate, a full history including when it was put into use, any specific legal requirements and whether they have been met, proper installation and where it was deployed, the schedule and details of maintenance and repairs, and the end-of-life date if specified. It says the frequency and type of planned preventive maintenance should be specified in line with the manufacturer's instructions, taking account of expected usage and the environment, that random audits should be carried out on all elements of maintenance, repair and record keeping, and that organisations should keep a record of the current location of devices to target safety communications and field safety notices, with records of the action taken. On service providers, it lists manufacturer service organisations, authorised agents, third-party providers, in-house departments and users, and says a risk-benefit analysis should come before the choice, with cost alone not the determining factor (MHRA, Managing Medical Devices, read on 12 November 2026).
The system is built around those records. Each device carries the evidence the guidance lists. Each model carries its maintenance plan from the manufacturer's instructions; any deviation by risk or usage is a recorded decision with its reason and approver. Audit samples can be drawn from the system, and the history of every work order shows who did what, when and with which result. International standards such as IEC 62353 for recurrent electrical safety testing and ISO 13485 for service quality systems are named in the configuration where your policy uses them.
Maintenance plans by model and risk
A model's plan comes from its manufacturer: tasks, intervals, test procedures, parts kits and the qualifications required. The system schedules them per device and spreads the workload over the year, grouped by location so a technician covers a ward or a site in one round. Devices that are hard to release from clinical use, such as ventilators or anaesthesia machines, are planned with the department so a replacement is available. Overdue work is visible per department and per risk class, and devices past their maintenance date can be flagged for withdrawal under the rule you set.
Safety tests and return to service
Electrical safety and performance tests produce numbers that decide whether a device may be used. The technician runs the test procedure for the device class in the app or on the analyser; results are entered or imported where the analyser exports them, checked against the limits for that class, and stored with the work order. A failed test opens a repair, and the device stays out of service until it passes. Return to service is a recorded step with the technician's name, so a ward can see in the portal when a device is back.
Field safety notices and recalls
When a manufacturer issues a field safety notice, the question is which of your devices are affected and where they are. The system finds them by model, software version and serial range, assigns the action, whether an inspection, a software update, a part replacement or withdrawal, and tracks each device until the action is closed. The notice, the actions and the evidence are kept with each device's history, so the response can be shown to the regulator or the accreditor later.
For medical equipment service companies
Independent service organisations maintain equipment for many hospitals, clinics, laboratories and care homes. The system keeps each client's sites, inventory, contracts and portal separate, while technicians work across clients on one schedule. Contract response times and uptime commitments drive the priorities, parts are tracked per client and per contract, and each client receives the maintenance and test reports its quality system needs. Technicians' manufacturer training and qualifications are stored with expiry dates and checked on assignment, because some manufacturers set criteria for who may service their devices.
The technician app
Technicians see their round, scan a device's asset label, open its history, plan and test procedure, record tasks, readings and parts, take photos and close the work order. The app works offline in basements, theatres and plant rooms where coverage is poor and syncs when the signal returns. We build for iPhone and Android from one codebase.
Data protection and security
A maintenance system holds device data, not patient records, but devices may store patient data, and repairs may expose it. The system records whether a device holds patient data and requires the data handling step you define before a device leaves the site or is scrapped. Access is role-based, sign-in uses your identity provider with two-factor authentication, every change is logged, and data stays in an EU data region. For hospital systems that do hold patient data, see EHR software development; for software that is itself a medical device, see medical device software development.
Integrations
- Procurement and finance. New devices from purchase orders, costs per work order and depreciation data.
- Asset location. Real-time location data where the hospital runs a tracking system.
- Safety analysers. Test result import where the analyser exports files.
- Service desk. Fault reports from the hospital's service desk or intranet.
- Identity. Single sign-on with your identity provider.
Ready-made healthcare CMMS or custom?
There are established products for healthcare technology management, such as Accruent's healthcare maintenance software and Nuvolo, as well as general CMMS products with healthcare modules. For many organisations one of them fits, and we will say so. Custom software pays off when your inventory model, risk policy, test procedures, multi-client service business or integrations do not match what the product assumes, or when contracts, recalls and test results still live outside the system.
| Situation | Ready-made product | Custom software |
|---|---|---|
| One hospital, standard processes | Often enough | Rarely worth building |
| Service company with many clients | Built for one organisation | Clients, contracts and portals separated |
| Risk-based plans with recorded decisions | Varies by product | Your policy, with reasons and approvers |
| Analyser and location data | The vendor's supported links | The equipment you use |
| Data location and ownership | The vendor's platform and region | Your account, EU data region |
How we build it
- Workshop with clinical engineering. Your managers, technicians and quality lead show how inventory, maintenance, tests and recalls run today. We write the rules down for approval.
- Scope and fixed price in writing. Inventory model, plans, test procedures, integrations and what the first phase leaves out, with a fixed price for that agreed scope.
- A test version on real data. Your inventory and the last year's work orders, imported and reconciled.
- Pilot with one site and acceptance. One site or department works in the system for a few weeks, rules are tuned, and the phase is accepted against the written scope.
- Roll out and measure. Overdue maintenance, devices with unknown location, time to close field safety actions and repair turnaround are compared with the numbers recorded at the start.
- Maintenance. Updates, monitoring, backups and security reviews, on a monthly plan you can cancel with one month's notice.
As a standard term, the source code sits in a repository in your organisation's own account, and the database and hosting are in your name. Hospitals that manage buildings and plant alongside medical devices may also want facility management software. See prices.
Questions we get
What is biomedical equipment management software?
Software that clinical engineering departments and medical equipment service companies use to run the device inventory, planned preventive maintenance, electrical safety and performance tests, repairs, service contracts, field safety notices and recalls, user training records and replacement planning, with a full history per device.
Is this software a medical device itself?
Usually not. A maintenance management system that records inventory, work orders and test results does not by itself have a medical purpose. If a function goes further, for example analysing device data to inform clinical decisions, that function needs its own regulatory assessment, which we do at the start of the project.
Can it plan maintenance by the manufacturer's instructions and by risk?
Yes. Each device model carries the maintenance tasks and intervals from the manufacturer's instructions, and each device can carry adjustments by usage, environment and risk where your policy allows it. Every adjustment is recorded with its reason and approver, so an auditor can see why a device is maintained the way it is.
Can it import results from our safety analysers?
Where the analyser or its software exports results, yes. Test results are attached to the device and the work order, checked against the limits for that device class, and failed tests open a repair automatically.
Can a medical equipment service company use it for many hospitals?
Yes. Each client has its own sites, inventory, contracts and portal, and technicians work across clients on one schedule. Contract response times, uptime commitments and reporting are kept per client.
Who owns the system and where is the data?
Your organisation. The source code sits in a repository in your own account, and the database and hosting are in your name in an EU data region. That is our standard term.
Get a written quote
Tell us in a few lines what you need. We reply within one working day with a written quote: scope, timeline and a fixed price or an hour estimate. Asking is free and commits you to nothing.