Skip to content
DT Nova
Services

Scheduling software for HVAC service companies and technicians

Scheduling software for HVAC companies that knows the difference between a dead heat pump in January and a spring tune-up: emergency jobs go to the nearest technician with the right certificate and parts, maintenance visits and legally required leak checks are planned before they fall due, and every refrigerant handled on site is logged for the equipment record. We build custom HVAC scheduling software and full HVAC field service management software for heating, ventilation, air conditioning and refrigeration contractors, hosted in the EU, and your company owns the code.

  • You see the result before it goes live
  • Fixed price for the agreed scope, in writing before work starts
  • Source code, domain and accounts in your company's name

Request a quote

Why HVAC needs its own scheduling

Our field service management software page covers companies with people on the road in general. HVAC adds three things that general tools handle poorly. The first is the weather: the first hot week brings a wave of cooling breakdowns, the first frost brings heating failures, and planned work has to give way without being forgotten. The second is regulation: refrigerant work needs certified people, and much of the equipment you service has leak checks on fixed intervals with records the operator must keep. The third is the equipment itself: every site has units with their own model, refrigerant, charge, warranty and service history, and the right job depends on all of it.

Most HVAC companies run on a scheduling board, a spreadsheet of maintenance agreements and a separate refrigerant logbook, and the dispatcher knows which technician can handle which system.

What the system does

Certified technicians for refrigerant work

In the EU, the F-gas Regulation requires natural persons to be certified for installation, maintenance or servicing, repair and decommissioning of stationary refrigeration, air-conditioning and heat pump equipment, for leak checks and for recovery, and the certification also covers relevant alternatives, including natural refrigerants, where relevant. Companies doing that work must be certified as legal persons too (Regulation (EU) 2024/573, Article 10). In the United States, EPA certification under Section 608 comes in separate types for small appliances, for medium-, high- and very high-pressure appliances and for low-pressure appliances, and a technician may work only on the appliance classes their certification covers (40 CFR 82.161).

The system stores each certificate with its category, issuer and expiry date. A job carries the equipment type and refrigerant, so the board only suggests technicians who may do the work, and an expired or missing certificate blocks the assignment instead of surfacing in an audit. Apprentices can be paired with a certified technician on jobs that allow it.

Leak checks that plan themselves

Under the EU F-gas Regulation, operators of equipment containing 5 tonnes of CO2 equivalent or more of the listed gases must have it checked for leaks, with hermetically sealed equipment exempt under conditions. The minimum frequency depends on the charge and on whether a leak detection system is installed (Article 5(6)):

Charge (tonnes CO2 equivalent)Leak check at least everyWith leak detection system
5 to under 5012 months24 months
50 to under 5006 months12 months
500 or more3 months6 months

After a leak is repaired on such equipment, a certified person must check the repair after at least 24 hours of operation and no later than 1 month after it (Article 4(5)). Operators must keep records per unit, including gas type and quantity, quantities added and recovered, who did the work and the dates and results of checks, for at least 5 years, and service companies keep copies for the same period (Article 7).

In the United States, the EPA rule under the AIM Act applies from 1 January 2026 to appliances with a full charge of 15 pounds or more of an HFC or a substitute with a global warming potential above 53, excluding the residential and light commercial air conditioning and heat pump subsector. The owner or operator must calculate the leak rate every time refrigerant is added, and repair leaks within 30 days when the rate exceeds 20% for commercial refrigeration, 30% for industrial process refrigeration or 10% for comfort cooling and other appliances (40 CFR 84.106). (All sources read on 11 November 2026.)

The system turns these rules into jobs. Each unit's refrigerant and charge decide whether checks are required and how often, the next check is planned as a job before it falls due and placed on the technician who visits that site anyway, and a repair automatically creates its follow-up check. When refrigerant is added, the leak rate is calculated on the spot and the technician sees if the threshold is exceeded before leaving the site.

Maintenance agreements around the seasons

Service agreements are the steady income of an HVAC company, and the first thing to slip when demand peaks. The system reads each agreement's visit plan, such as a cooling check in spring and a heating check in autumn, and spreads the visits over the weeks before each season instead of leaving them to pile up. It keeps a share of each technician's capacity free for breakdowns during peak weeks, by a rule you set, and moves planned visits forward when a heatwave or cold spell is forecast. Customers get a booking link and reminders, and missed visits stay visible until they are done.

Emergency jobs and dispatch

When a breakdown comes in, the board suggests technicians by priority, skill, certificate, current location, the next job they would delay and the parts in their van, with the travel time to the site. The dispatcher decides. Customers get a time window and an update when the technician is on the way. Multi-day installations, such as a new heat pump or a rooftop unit, are planned as a crew over several days, with the commissioning visit and the first leak check planned in the same step.

The technician app

Technicians see their day, the site and its equipment history, open the right checklist for the unit, record readings, take photos and get a signature. The refrigerant log sits in the job: gas type, quantity added or recovered, cylinder reference and leak check result. The app works offline in plant rooms and basements and syncs when the signal is back. We build for iPhone and Android from one codebase.

HVAC field service management software, beyond the schedule

Scheduling decides who goes where. HVAC field service management software runs everything around that visit, from the first enquiry to the paid invoice, and keeps the history of every unit you look after. It is the same base as our field service management software, with the parts that make HVAC different built in:

Parts, alarms and the systems you keep

Van stock and warehouse stock are tracked per item, so the board knows which van carries the right compressor or control board, and parts used on a job flow into the invoice and the reorder list. Building management systems and connected equipment can raise jobs automatically when an alarm fires; see IoT software development for the device side. Customers, price lists and invoicing can stay in your accounting or ERP system, connected through its interface.

Ready-made HVAC software or custom?

There are established products for HVAC and trade contractors, such as ServiceTitan, Jobber, Housecall Pro and simPRO. For many companies one of them fits, and we will say so. Custom software pays off when your agreements, refrigerant records, commercial clients' requirements or integrations do not match what the product assumes, or when the refrigerant log still lives in a separate spreadsheet.

SituationReady-made productCustom software
Residential service, standard agreementsUsually enoughRarely worth building
Commercial refrigeration with leak check dutiesVaries, often add-onsRules per unit, jobs planned before they fall due
Client portals and reporting for facility managersStandard customer portalThe reports your clients ask for
Link to your ERP, stock and building systemsThe vendor's list of integrationsBuilt for the systems you use
Data location and ownershipThe vendor's platform and regionYour account, EU data region

How we build it

  1. Workshop with dispatch and the field. Your dispatchers and senior technicians show how a peak week runs today, including the unwritten rules about who can handle which systems. We write them down for approval.
  2. Scope and fixed price in writing. Job types, equipment register, rules, integrations and what the first phase leaves out, with a fixed price for that agreed scope, signed before work starts.
  3. A test version on real data. Your customers, sites, equipment and last season's jobs, so the plan can be compared with the one built by hand.
  4. Pilot with one team and acceptance. A group of technicians uses the app for a few weeks, the rules are tuned, and the phase is accepted against the written scope.
  5. Roll out and measure. First-time fix rate, overdue maintenance visits, overdue leak checks and travel time are compared with the numbers recorded at the start.
  6. Maintenance. Updates, monitoring, backups and rule changes when refrigerant rules change, on a monthly plan you can cancel with one month's notice.

As a standard term, the source code sits in a repository in your company's own account, and the database and hosting are in your name. For crews on building sites, see construction labor scheduling software; for stock, see inventory management software. See prices.

Questions we get

What makes HVAC scheduling different from other field service scheduling?

Demand swings with the weather, so the first heatwave or cold week fills a month of capacity in days. Planned maintenance under service agreements has to be spread around those peaks, refrigerant work needs certified technicians, and many systems have legally required leak checks on fixed intervals. A general scheduling tool treats all of that as ordinary jobs.

Can the system plan F-gas and EPA leak checks automatically?

Yes. Each piece of equipment is stored with its refrigerant type and charge, and the system works out whether leak checks are required and how often under the rules that apply, for example every 12, 6 or 3 months under the EU F-gas Regulation depending on the charge and whether a leak detection system is fitted. The checks appear as jobs before they fall due.

Does it check technician certification?

Yes. Each technician's refrigerant handling certificates, their category and expiry date are stored with the record. The system will not assign a job that needs a certificate the technician does not hold on that date, and it warns before a certificate expires.

Can technicians record refrigerant added and recovered on the job?

Yes. The technician app has a refrigerant log per job: gas type, quantity added or recovered, cylinder reference and leak check result. The data builds the equipment record the operator must keep and the leak rate calculation where one is required.

Can it work alongside our accounting or ERP system?

Yes. Customers, sites, price lists and invoices can stay in the accounting or ERP system you use. The scheduling system sends completed jobs, hours and parts used through its interface, so nobody retypes them.

Who owns the system and the data?

Your company. The source code sits in a repository in your own account, and the database and hosting are in your name in an EU data region. You can keep us for maintenance, run it yourself or hand it to another team.

Is this HVAC field service management software or only a scheduler?

Both, depending on the scope you choose. Scheduling and dispatch are usually the first phase. The full HVAC field service management software adds the equipment register, quotes, service agreements, refrigerant records, stock, invoicing and a customer portal, phase by phase.

Get a written quote

Tell us in a few lines what you need. We reply within one working day with a written quote: scope, timeline and a fixed price or an hour estimate. Asking is free and commits you to nothing.

See every price · Contact details

Request a quote