Skip to content
DT Nova
Services

An ERP system for construction, built around your sites and jobs

An ERP system for construction companies that works the way building work really runs: by job and by site. Quotes become budgets, hours and purchases are booked against the right job, change orders are priced and approved before the work is done, and progress billing goes out on time. Supervisors see each job's cost against its budget while there is still time to act. We build it as custom software, and your company owns the code.

  • You see the result before it goes live
  • Fixed price for the agreed scope, in writing before work starts
  • Source code, domain and accounts in your company's name

Request a quote

Who it is for

Our construction ERP work is for companies of roughly ten to two hundred people: renovation and refurbishment companies, electrical, plumbing and HVAC contractors, specialist subcontractors and smaller general contractors. The pattern is familiar. Estimates are built in spreadsheets, hours arrive on paper or in a messaging app, purchase invoices are matched to jobs at month end, and the real margin of a project is known only after it is finished. By then, nothing can be done about it.

What the system covers

Job costing while the job is still running

The single most valuable thing a construction ERP does is show a job's cost against its budget during the job, not after it. When labour on a bathroom renovation reaches 70% of its budget at 50% completion, a supervisor can act this week: check the estimate, raise a change order or move a crew. Without that view, the same information arrives as a disappointing margin three months later.

That view depends on boring discipline: hours booked to the right job on the same day, purchases ordered against a job, and subcontractor invoices matched to a contract. The system makes the right way the easy way, with job and site already selected in the mobile app and purchase orders created from the job itself.

Finnish construction reporting, built in

Construction in Finland carries its own reporting duty. The Tax Administration's guidance on the information reporting requirement in the construction industry, valid from 1 January 2025, says that the buyer of construction services reports contract details and the project supervisor of a shared site reports employee details. Reports are monthly and due by the fifth day of the second month after the reporting month. Contract reporting applies when a contract's value goes over 15,000 euros excluding VAT, and neglect can lead to a charge of up to 15,000 euros. (Read on 10 November 2026.)

A construction ERP already holds the contracts, sites, employers and workers, so these reports can be built from the same data rather than compiled by hand every month. The system checks for missing details before the deadline, and your accountant or payroll provider confirms the rules for your company. The same records support the checks you make on subcontractors under the Contractor's Obligations Act, with document expiry dates tracked per company.

Service and maintenance work

Many construction companies also run service work next to their projects: maintenance contracts, warranty repairs and small jobs that take a few hours. Those need a different flow, with work orders, quick quotes and invoices per visit rather than per milestone. A custom system can handle both in one place, with the same customers, crews and accounting connection, instead of a project tool and a separate service app.

Ready-made construction ERP or custom?

There are capable ready-made products for construction, such as Procore, Buildertrend and Viewpoint internationally, and several Nordic products. For many companies one of them is the right choice. The question is whether your way of working fits theirs.

SituationReady-made productCustom system
Standard estimating and billingUsually a good fitRarely worth building
Your own estimating method or cost itemsAdapted with workaroundsBuilt exactly as you estimate
Mixed work: projects plus service and maintenanceOften split over two productsOne system for both
Local reporting and accounting systemsDepends on the vendor's integrationsBuilt for your accounting and payroll
Headcount growingPer-user fees grow with every hirePaid for once; running costs follow use
Ownership of data and codeHeld in the vendor's platformIn your company's own account

A useful test: if your office keeps spreadsheets next to the current system to estimate, to track change orders or to see job margins, the system does not fit the way you work. If there are no such spreadsheets, keep what you have, and we will tell you so in the first reply to your brief.

The mobile app for site crews

Site crews get a simple app: today's site and job, hours, photos, a diary entry, a material request and a change-order note. It works with a weak signal and syncs when it reconnects. We build for iPhone and Android from one codebase, or as a web app installed to the home screen when that is enough. If your crews also do service visits job by job, the same app can include work orders; see field service management software. For shift-based crews, see employee scheduling software; to plan crews and trades across sites from the programme, see construction labor scheduling software.

Construction management software for the site

A construction ERP runs the company: jobs, costs, invoicing. Construction management software runs each site: the programme and look-ahead plan, the site diary, subcontractor coordination, inspections and quality checklists, defect lists with photos and locations on the drawing, safety observations, requests for information and the handover documentation. We build both in one system, so a defect recorded on site carries its cost to the job, and a change order agreed with the client appears in the next invoice without retyping.

Connected to the systems you keep

Materials, tools and yard stock per job site are covered in more detail on our construction inventory management software page. A construction ERP should not try to be your accounting system. Sales invoices, purchase invoices and approved hours move to the accounting and payroll systems you already use, through their interfaces or a file they accept, and e-invoices are sent through your operator. Supplier price lists can be imported so estimates use current prices. For moving data between other systems, see business process automation. Bids, tenders and client follow-up before a job is won belong in a construction CRM, which hands won jobs to the ERP.

How we build it

  1. Workshop on one real job. Your estimator, a supervisor and the office walk us through a finished project, from quote to final invoice.
  2. Scope and fixed price in writing. Users, modules, integrations and what the first phase leaves out, signed before work starts.
  3. First phase on your data. Usually job costing, site hours and purchases, because they produce the margin view.
  4. Pilot on live jobs. Two or three running jobs move to the system first, and the rules are tuned on them.
  5. Roll out and retire the spreadsheets. Then estimating, change orders and billing follow in later phases, each live before the next.

You own it

As a standard term, the source code sits in a repository in your company's own account, and the database and hosting are in your company's name, in an EU data region. You can keep us for maintenance, run it yourself or hand it to another team. For a general ERP outside construction, see light ERP, and for the wider picture, bespoke software development. For delivery notes, supplier invoices and subcontracts read automatically, see AI document processing. For site apps, bids, subcontractor portals and safety records, see construction software development. See prices.

Questions we get

Is a construction ERP worth it for a company of 20 people?

Often yes, if the same job data is typed into several places and job margins are only known after the project ends. The test is simple: can you see today what each running job has cost against its budget? If not, the system pays back in decisions made in time.

Can it handle the Finnish construction reporting to the Tax Administration?

Yes. Contracts, sites and workers are already in the system, so the monthly contract and employee reports are built from that data and checked before they are filed. Your accountant or payroll provider confirms the rules, and the system applies them every month.

Do site crews need to learn a complicated system?

No. Crews use a simple mobile app: today's site, hours, photos, a site diary entry and material requests. The planning and cost views are for supervisors and the office.

Can it work with our accounting and payroll systems?

Yes. Invoices, purchase invoices and approved hours move to the accounting and payroll systems you already use, through their interfaces or a file they accept. Accounting itself stays in a proper accounting system.

Should we buy a ready-made construction ERP instead?

Sometimes. Several ready-made products cover the common case well, and we say so when one fits. Custom pays off when your way of estimating, subcontracting or billing is specific, or when per-user fees grow with every hire.

Who owns the system and the data?

Your company. The source code sits in a repository in your own account, the database and hosting are in your company's name in an EU data region, and any competent team can continue the work.

Get a written quote

Tell us in a few lines what you need. We reply within one working day with a written quote: scope, timeline and a fixed price or an hour estimate. Asking is free and commits you to nothing.

See every price · Contact details

Request a quote