Electrical contractor software for service jobs, projects and test reports
Electrical contractor software that understands the difference between a tripped circuit at a shop, a periodic inspection of a school and a six-week fit-out: service jobs and projects share one board, each task goes to an electrician who is qualified and authorised for it, isolation steps sit inside the job, and test results become the certificate on site. We build custom electrical contractor management software for electrical installation, maintenance and inspection companies, hosted in the EU, and your company owns the code.
- You see the result before it goes live
- Fixed price for the agreed scope, in writing before work starts
- Source code, domain and accounts in your company's name
Why electrical contractors outgrow general job software
Our field service management software page covers companies with technicians on the road in general. Electrical contractors add three things that general tools handle poorly. The first is the mix of work: a contractor may run dozens of short service jobs a day while a crew spends weeks on one installation, and both draw on the same people. The second is competence: who may work on what is not a matter of preference but of qualification, authorisation and the voltage involved. The third is evidence: every installation and inspection ends in test readings and a formal record, and that record is what the customer, the insurer and the authority look at.
Most contractors run this on a whiteboard or a scheduling tool, a spreadsheet of qualifications, paper or PDF test forms and a separate quoting tool, and the office knows which electrician may do which job.
What the system does
- Job intake. Faults, small works, inspections, quotes and project tasks, each with a type that carries its required qualification, checklist and report template.
- One board for service and projects. Daily service work and project phases on the same people, with travel time, promised windows and crew size.
- Qualification matching. Each electrician's qualifications, authorisations, voltage levels and expiry dates, checked on every assignment.
- Isolation and lockout steps. The safe isolation sequence inside the job, confirmed step by step in the app before work starts.
- Test results and certificates. Readings entered once on site, checked against limits, and turned into the certificate or inspection report.
- Periodic inspections. Recurring inspections per site and installation, planned before they fall due.
- Materials and stock. Wholesaler price files, van stock, materials reserved per project and used per job.
- Quotes and invoicing. Field quotes from your price list, approved on screen, with hours and materials sent to accounting.
Qualified people on the right tasks
Electrical safety rules decide who may do the work, and they differ by country, so the system stores the rule set you approve rather than a fixed list. In the United States, OSHA requires employees who face a risk of electric shock to be trained in the safety-related work practices for their job, and qualified persons, those permitted to work on or near exposed energized parts, must at a minimum be trained to distinguish exposed live parts, determine their nominal voltage and know the clearance distances for the voltages they will be exposed to (29 CFR 1910.332). In Great Britain, no person may be engaged in work where technical knowledge or experience is needed to prevent danger or injury unless they have that knowledge or experience, or are under appropriate supervision (Electricity at Work Regulations 1989, regulation 16). (Both read on 12 November 2026.)
The system turns that into data. Each job type lists what it requires, such as work on energised equipment, a voltage level, an inspection authorisation or a specific manufacturer's training for a charger or a fire alarm panel. Each electrician's record holds the matching qualifications with issue and expiry dates. The board only suggests people who meet the requirement on the day of the job, apprentices are paired with a qualified electrician where the job allows supervision, and the office gets a warning weeks before a qualification lapses instead of finding out on site.
Isolation and lockout inside the job
OSHA requires that while employees are exposed to parts of fixed electric equipment or circuits that have been deenergized, the circuits are locked out, tagged or both, following the steps in the order they are presented, that a lock and a tag are placed on each disconnecting means, and that the employer keeps a written copy of the procedures available for inspection (29 CFR 1910.333(b)(2), read on 12 November 2026). European countries have their own national rules and standards for safe isolation, which the contractor's procedure follows.
The system puts your written procedure inside the job. Before the electrician can open the task, the app shows the isolation steps for that kind of equipment: identify the supply, isolate, lock and tag, prove the tester, test for absence of voltage, prove the tester again. Each step is confirmed with a tap, a photo of the lock where you require it and the time. The record stays with the job, so the safety manager can see which jobs were done dead, which needed live work and who authorised it.
Test results and certificates on site
Every installation, alteration and periodic inspection ends in a set of readings: continuity, insulation resistance, earth fault loop impedance, protective device trip times, polarity and the observations the inspector makes. On paper, these are copied from the tester to a form and later typed into a report. In the system, the electrician enters them once in the app or imports them from a tester that exports a file, the values are checked against the limits you configure, and anything outside them is flagged before the electrician leaves the site.
The report is generated from your template, whether it is an installation certificate, a minor works record, a periodic inspection report or a commissioning record for a charger or a solar system, with the electrician's name and qualification number filled in. Observations carry a code and become follow-up quotes. Each report stays on the site record, so the next inspection starts from the last one rather than from nothing.
Periodic inspections and maintenance contracts
Commercial customers, housing companies and public buildings have installations that need periodic inspection and testing at intervals set by national rules, standards and insurers. The system stores each installation with its type, last inspection date and the interval you set, and plans the next one as a job before it falls due, grouped by area so one electrician covers several sites in a day. Maintenance contracts for emergency lighting, charging points or switchgear work the same way, with the contract's visit plan and response time driving the jobs and the invoices.
Service jobs and projects on one board
The hardest scheduling problem for an electrical contractor is that service and project work compete for the same people. A fit-out needs a crew of four for three weeks; the service desk needs two people free every morning for faults. The board shows both. Project phases are planned with crew size, dates and materials, service jobs fill the days around them, and when a project slips, the system shows which service capacity it eats before anyone moves a name. Project managers see hours and materials against budget per phase, and variations raised on site become change orders the customer approves. For crews on larger building sites, see construction labor scheduling software.
The electrician's app
Electricians see their day, the site, the installation history and the drawings, open the right checklist, run through isolation steps, record readings, take photos and get the customer's signature. Materials are picked from the van's stock or the project reservation, and extra materials are added to the job, not to a note in a pocket. The app works offline in plant rooms, basements and new buildings without coverage, and syncs when the signal returns. We build for iPhone and Android from one codebase.
Integrations
- Electrical wholesalers. Price files and product data in the formats your wholesaler supplies, and orders sent from a project or a job.
- Accounting and ERP. Customers, invoices and costs in the system you use, such as Xero, QuickBooks, Business Central, Netvisor or Procountor.
- Payroll. Approved hours, overtime and allowances sent in the file your payroll accepts.
- Estimating and drawings. Quantities from your estimating tool, drawings and single-line diagrams attached to the site.
- Testers. Import of exported test files where your instruments support it.
- Customer portal. Certificates, inspection reports and open observations for commercial customers in one place.
Stock in the warehouse and vans can live in the same system; see inventory management software.
Ready-made electrical contractor software or custom?
There are established products for electrical and trade contractors, such as simPRO, ServiceTitan, Fergus and Tradify, and estimating tools built for electrical work. For many contractors one of them fits, and we will say so. Custom software pays off when your mix of service and project work, your test certificates, your qualification rules or your commercial customers' reporting do not match what the product assumes, or when qualifications and test forms still live outside the system.
| Situation | Ready-made product | Custom software |
|---|---|---|
| Small service jobs, one crew | Usually enough | Rarely worth building |
| Service and projects on the same people | Often separate modules or tools | One board, both kinds of work |
| Test certificates in your national format | Varies by product and country | Your templates, filled from site readings |
| Qualification rules per job type | Basic skill tags | Rules per task, checked on assignment |
| Data location and ownership | The vendor's platform and region | Your account, EU data region |
How we build it
- Workshop with the office and the field. Your planners, project managers and senior electricians show how a normal week runs, including the unwritten rules about who may do what. We write them down for approval.
- Scope and fixed price in writing. Job types, qualification rules, report templates, integrations and what the first phase leaves out, with a fixed price for that agreed scope.
- A test version on real data. Your customers, sites, electricians and last month's jobs, so the board can be compared with the one built by hand.
- Pilot with one team and acceptance. A group of electricians uses the app for a few weeks, the rules are tuned, and the phase is accepted against the written scope.
- Roll out and measure. Time from job completion to invoice, overdue inspections, repeat visits and travel time are compared with the numbers recorded at the start.
- Maintenance. Updates, monitoring, backups and rule changes, on a monthly plan you can cancel with one month's notice.
As a standard term, the source code sits in a repository in your company's own account, and the database and hosting are in your name in an EU data region. Contractors who also install solar systems can extend the same base with solar installer software, and those who install alarms and cameras with alarm company software. See prices.
Questions we get
What should electrical contractor software do that general job software does not?
It has to run small service jobs and multi-week installation projects side by side, match each task to an electrician with the right qualification and authorisation, keep lockout and isolation steps inside the job, and turn test results into the certificate or report the customer and the authority expect. General tools treat all of that as free text.
Can the system produce our test certificates and inspection reports?
Yes. The test forms are built from your templates, whether that is an installation certificate, a periodic inspection report or a commissioning record. The electrician enters readings on site, the system checks them against the limits you set, and the finished report goes to the customer as a PDF and stays on the site record.
Does it check electricians' qualifications before assigning a job?
Yes. Each person's qualifications, authorisations and expiry dates are stored, and each job type lists what it needs, for example work on energised equipment or a specific voltage level. The board only suggests people who meet the requirement on that date and warns before a qualification expires.
Can it handle both service work and projects?
Yes. Service jobs are planned by the day with time windows and travel. Projects are planned in phases with crews, materials and budgets, and the same electricians move between the two on one board, so a project does not silently absorb the people the service desk was counting on.
Can it connect to our wholesaler and accounting system?
Yes. Price files and orders from your electrical wholesaler, stock in the warehouse and vans, and invoices in your accounting or ERP system can all be connected through their interfaces or the file formats they accept, so materials are never typed twice.
Who owns the software?
Your company. The source code sits in a repository in your own account, and the database and hosting are in your name in an EU data region. That is our standard term, whether you keep us for maintenance or not.
Get a written quote
Tell us in a few lines what you need. We reply within one working day with a written quote: scope, timeline and a fixed price or an hour estimate. Asking is free and commits you to nothing.