Skip to content
DT Nova
Services

Pest control software for recurring routes, treatments and client reports

Pest control software that plans the monthly round of a food plant, a restaurant and a housing block as carefully as an urgent wasp nest: recurring visits on efficient routes, each treatment given to a technician licensed for that product and method, every product, dose and bait station recorded on site, and the report a client's auditor asks for produced without retyping. We build custom pest control business management software for pest management companies, hosted in the EU, and your company owns the code.

  • You see the result before it goes live
  • Fixed price for the agreed scope, in writing before work starts
  • Source code, domain and accounts in your company's name

Request a quote

Why pest control needs its own system

Our field service management software page covers companies with technicians on the road in general. Pest control adds three things general tools handle poorly. The first is the contract round: much of the revenue comes from sites visited every month or every few weeks, often with dozens of bait stations and monitors each, and a missed station is a finding in the client's next audit. The second is regulated products: who may use which product, in which way, is set by law, and every use must be recorded. The third is the report: food producers, warehouses, hotels and housing companies need documented proof of what was found and done, in a format their auditor accepts.

Many companies run this with a scheduling tool, paper or spreadsheet logs for stations, a binder of safety data sheets and reports assembled by hand at the end of the month.

What the system does

Products, authorisations and the rules on use

Most products a pest controller uses against rodents and insects are biocides. In the EU, biocidal products may not be made available on the market or used unless they are authorised, they must be used in line with the terms of the authorisation and the labelling requirements, and proper use means a rational combination of physical, biological, chemical or other measures so that the use of biocidal products is limited to the minimum necessary (Regulation (EU) No 528/2012, Article 17). Many authorisations restrict certain products, such as some rodenticides and fumigants, to trained professionals, and Member States add national licensing for pest control operators.

In the United States, the EPA sets competency standards for commercial applicators by category, including one for industrial, institutional, structural and health related pest control (40 CFR 171.103). Restricted use pesticides may be used only by a certified applicator or by a noncertified applicator under the direct supervision of one, the noncertified applicator must have been trained within the last 12 months and must have a means to communicate with the certified applicator immediately, and the commercial applicator must keep records of each noncertified applicator's qualification available at the principal place of business for two years (40 CFR 171.201). States add their own licensing and record rules. (All sources read on 12 November 2026.)

The system turns these rules into data. Each product in your catalogue carries its authorisation or registration number, its approved uses and whether it is restricted to professionals or certified applicators. Each technician's record holds their licences and categories with expiry dates, and each trainee's training date. When a job is planned, the board only suggests people allowed to do it; when a trainee works under supervision, the supervisor is recorded with the job. The technician can only pick products that are approved for the use selected, and the label instructions and safety data sheet are one tap away.

Integrated pest management in the record

The same Article 17 points to what most audit standards also expect: inspection and prevention first, chemicals where needed. The treatment record follows that order. The technician records the evidence found, such as droppings, gnaw marks, live or dead insects and the likely entry point, then the non-chemical measures taken or recommended, such as proofing, hygiene, waste handling or traps, and only then any product used. Recommendations to the client become open actions in the portal with a due date and status, so a gap under a loading dock door is followed up on the next visit instead of being repeated in every report.

Bait stations and monitors that cannot be skipped

A food plant may have a hundred or more stations inside and around the building. Each station in the system has a code, a type, a position on the site plan and a check frequency. The technician scans each one, records activity, bait consumption, condition and any action, and the app shows which stations on today's route have not been checked yet. Missing stations stay open until they are found or replaced. Over months, the data shows activity per station and per zone, so the technician and the client can see where pressure is rising before it turns into an infestation, and the record shows that every station was checked at the agreed frequency.

Reports for contract clients and their auditors

Contract clients in food production, logistics, retail and hospitality are audited against food safety standards and retailer requirements that ask for documented pest control: a site plan with stations, visit reports, trend analysis, products used with their safety data sheets, technician qualifications and records of corrective actions. The system produces these from the visit data, in the structure the client asks for, and keeps them in a client portal with the full history. Before an audit, the client downloads the year's file instead of asking your office to assemble it.

The technician app

Technicians see their route, open each site with its plan, history, access notes and hazards, scan stations, record findings and treatments, take photos, and get a signature with the advice given. Product and dose are chosen from the approved list, and quantities used come off the van's stock. The app works offline in basements, warehouses and plant rooms and syncs when the signal returns. We build for iPhone and Android from one codebase.

Integrations

Ready-made pest control software or custom?

There are established products for pest control companies, such as PestPac, FieldRoutes, GorillaDesk and ServSuite. For many companies one of them fits, and we will say so. Custom software pays off when your contract structure, your national product and licensing rules, your clients' audit reports or your integrations do not match what the product assumes, or when station checks and reports still happen outside the system.

SituationReady-made productCustom software
Residential treatments, standard plansUsually enoughRarely worth building
Food industry contracts with auditsStandard report formatsThe report structure each client asks for
National product and licence rules in the EUOften built around US rulesYour country's rules, per product and person
Connected traps and sensorsThe vendor's supported devicesThe devices you choose
Data location and ownershipThe vendor's platform and regionYour account, EU data region

How we build it

  1. Workshop with the office and the field. Your planners and senior technicians show how routes, contracts and reports work today, including the rules about who may use what. We write them down for approval.
  2. Scope and fixed price in writing. Contracts, routes, product catalogue, licence rules, report templates and integrations for the first phase, with a fixed price for that agreed scope.
  3. A test version on real data. Your clients, sites, stations and last month's visits, so routes and reports can be compared with today's.
  4. Pilot with one area and acceptance. A group of technicians uses the app for a few weeks, rules and reports are tuned, and the phase is accepted against the written scope.
  5. Roll out and measure. Missed stations, overdue contract visits, time from visit to report and travel time are compared with the numbers recorded at the start.
  6. Maintenance. Updates, monitoring, backups and changes when product authorisations or rules change, on a monthly plan you can cancel with one month's notice.

As a standard term, the source code sits in a repository in your company's own account, and the database and hosting are in your name. Companies that also run grounds and lawn treatments can use the same base; see landscaping in our field service management software page. See prices.

Questions we get

What does pest control software need to record?

For each visit: the site, the pest and the evidence found, the product used with its registration or authorisation number, quantity and dilution, where it was applied, the technician and their licence, and the advice given. For contract sites it also records each bait station or monitor checked, its activity and any corrective action.

Can it manage bait stations and monitors with barcodes?

Yes. Each station or monitor gets a code and a place on the site plan. The technician scans it, records activity, consumption and condition, and the system shows trends per station and per area, so the client sees where activity is rising and missed stations stay visible until they are checked.

Does it check technician licences before a treatment?

Yes. Each technician's licences or certificates, their categories and expiry dates are stored, and each treatment type lists what it needs. The system will not assign a fumigation or a restricted product to someone who is not allowed to use it on that date, and it records supervision where the rules allow it.

Can our food industry clients get the reports their auditors want?

Yes. Contract clients get a portal or a scheduled PDF with visit reports, station maps, activity trends, products used with their safety data sheets and open recommendations, in the structure their audit standard or retailer asks for.

Can we start with routes and the technician app only?

Yes. Most companies start with scheduling, routes and the app with treatment records. Station mapping, the client portal, quoting and stock follow in later phases, each with its own scope and fixed price.

Who owns the system and the data?

Your company. The source code sits in a repository in your own account, and the database and hosting are in your name in an EU data region.

Get a written quote

Tell us in a few lines what you need. We reply within one working day with a written quote: scope, timeline and a fixed price or an hour estimate. Asking is free and commits you to nothing.

See every price · Contact details

Request a quote