Skip to content
DT Nova
Software development

Manufacturing software development for factories and industrial companies

DT Nova is a manufacturing software development company for the work between the ERP and the machines: shop floor data collection, quality and nonconformance handling, batch and serial traceability, maintenance, machine data and the portals that connect you with suppliers and customers. We build in phases with a fixed price per agreed scope, connect to the systems you already run and keep the code in your company's name.

  • You see the result before it goes live
  • Fixed price for the agreed scope, in writing before work starts
  • Source code, domain and accounts in your company's name

Request a quote

Where manufacturers need their own software

Small and mid-size manufacturers usually have an ERP for orders, stock and finance, a CAD or PLM tool for design, and a shop floor that runs on paper travellers, whiteboards and spreadsheets. The typical signs are familiar: produced quantities and scrap are typed into the ERP at the end of the shift, a customer complaint takes days to trace back to a batch, machine stops are known only from memory, and the quality manager rebuilds the same report every month. Each of those is a gap where information already exists but does not reach the person who needs it.

Software development for manufacturing pays off when it closes those gaps without a five-year programme. We look for the step where data is copied by hand or arrives too late to act on, and build the smallest system that fixes it.

What we build

SystemWho uses itWhat it handles
Shop floor data and light MESOperators, supervisorsWork orders at the workstation, start and stop, quantities, scrap, labour time, digital work instructions
Quality managementQuality team, operatorsInspections, measurements, nonconformance reports, corrective actions, certificates
TraceabilityProduction, quality, customersBatch and serial numbers from raw material to delivery, recalls in minutes
MaintenanceMaintenance teamMachine register, preventive schedules, fault reports, spare parts
Machine data and OEEProduction managementRunning and stopped time, counts, stop reasons, availability, performance and quality
Portals and configuratorsSuppliers, dealers, customersOrders and confirmations, delivery schedules, documents, product configuration and quotes

Several of these have pages of their own: manufacturing ERP, production scheduling software, preventive maintenance scheduling software, spare parts inventory management, material resource planning software and manufacturing CRM. This page is the overview of manufacturing as an industry.

Connecting machines, ERP and people

In a factory, value is lost between systems. A sales order becomes a work order in the ERP, the bill of materials comes from engineering, the machine knows how many parts it made, the operator knows why it stopped, and quality knows which batch failed inspection. When each of those lives in a different place, nobody sees the whole picture until someone builds a spreadsheet.

We build the connections as a layer of their own. Machine data is read through OPC UA, MQTT or a gateway for older controllers, and stored with the work order and batch it belongs to. ERP integration runs both ways through the product's interface: work orders and materials in, quantities, scrap and times out. Bills of materials come from the PLM or CAD export your engineers already use. Customer and supplier orders can arrive through EDI or a portal. Every message is logged and retried, and failures appear in a queue with the reason. For device connectivity in more depth, see IoT software development.

The rules that shape manufacturing software

Machinery Regulation. Regulation (EU) 2023/1230 replaces the Machinery Directive and applies from 14 January 2027. Its definition of a safety component covers a physical or digital component, including software, that is designed to fulfil a safety function and is independently placed on the market (Article 3, read 12 November 2026). Software that only records production does not perform a safety function; software that does is a different project with its own conformity route, and we say so at the scoping stage.

Cyber Resilience Act. Regulation (EU) 2024/2847 sets cybersecurity requirements for products with digital elements placed on the EU market. It applies from 11 December 2027, while the manufacturer's duty under Article 14 to report actively exploited vulnerabilities, with an early warning within 24 hours, applies from 11 September 2026 (read 12 November 2026). If you sell connected machines or software with your products, the update process and vulnerability handling belong in the design.

NIS2. Directive (EU) 2022/2555 lists manufacturing among its other critical sectors in Annex II, including the manufacture of computer, electronic and optical products, electrical equipment, machinery and equipment, motor vehicles and other transport equipment (read 12 November 2026). Manufacturers in scope must manage cybersecurity risk in their supply chain, which includes the software suppliers they use.

Data Act. Regulation (EU) 2023/2854 applies from 12 September 2025. Users of connected products have a right to access the data their use generates, in a structured, commonly used and machine-readable format (Article 4), and the design obligation in Article 3(1) applies to connected products placed on the market after 12 September 2026 (Article 50, read 12 November 2026). For manufacturers that sell connected equipment, a customer data portal or export interface is becoming part of the product.

Built for the shop floor

Operators judge software in seconds, often with gloves on and a machine waiting. Workstation screens show the current work order and the next step, use large targets and scanning instead of typing, and confirm every action clearly. Work instructions show pictures and drawings at the step where they are needed. Supervisors see the shift on one screen, and the office sees the same numbers without asking. We test on the devices your staff actually use, in the noise and light of the factory, before anything goes live.

Ready-made MES or custom?

There are capable ready-made MES, quality and maintenance products, and for a standard operation one of them is often the right buy. Custom software pays off when your process is what customers choose you for, when you would need several products glued together, or when the product's shop floor screens do not match how your people work.

SituationReady-made usually winsCustom usually wins
Standard discrete productionAn MES module from your ERP vendorMixed production with your own routing logic
QualityA QMS for document control and auditsInspections built into the operator's own screens
Machine dataOne machine brand with its own cloudMany brands and ages in one view
PortalsYour ERP vendor's standard portalA portal shaped around your dealers and products

A common middle path is a ready-made core with custom software around it. We say which route fits in the first reply to your brief.

How we build it

  1. Walk the floor. We follow one order from release to delivery, at the workstation and in the office, and note every manual step and every wait.
  2. Agree the scope on one page. Usually the flow with the most retyping, such as quantities and scrap at one line, with what is excluded and how success is measured.
  3. Fixed price for the agreed scope. Signed before work starts.
  4. Test version on your real data. Your products, routings and last month's orders, while the old way still runs.
  5. Pilot and acceptance. One line or one cell for a few weeks, then acceptance in writing against the criteria in the scope.
  6. Roll-out and maintenance. The next lines and the next phase, chosen by measured time and errors saved, with maintenance cancellable with one month's notice.

You own it

The source code sits in a repository in your company's own account from the first day. Hosting runs in an EU data region, or on servers in your own plant where the network requires it, and the databases and integration credentials are in your company's name. You can keep us for maintenance, run it yourself or hand it to another team.

Manufacturing is one of several industries we build for; the custom software development company page explains how we work across all of them. Related industry pages: construction software development, logistics software development and pharmaceutical software development. For the background, read our guides to manufacturing and artificial intelligence and manufacturing predictive analytics; for the IT side of a plant, see managed IT services for manufacturing. See prices. Send us a short brief about the step you want to fix first, or read more about our bespoke software development process.

Questions we get

What manufacturing software do you build?

The systems between the ERP and the machines: shop floor data collection and light MES, work instructions, quality and nonconformance handling, batch and serial traceability, maintenance, machine data and OEE dashboards, supplier and customer portals, product configurators and the integrations that join them. We also build the ERP itself for smaller manufacturers; see our manufacturing ERP page.

Do you replace our ERP?

Usually not. The ERP keeps orders, stock, purchasing and finance. We build what it does not do well on the shop floor and connect it both ways, so a work order created in the ERP appears at the workstation and the reported quantities and scrap flow back without typing.

Can you read data from our machines?

Yes, in most cases. Modern machines and controllers often offer OPC UA or MQTT; older ones can be read through a gateway or the data they already write to files. We start with the signals that answer a business question, such as running, stopped and count, rather than collecting everything.

Does the Cyber Resilience Act apply to us?

It applies to products with digital elements that you place on the EU market, such as connected machines or the software you sell with them, from 11 December 2027, with the duty to report actively exploited vulnerabilities from 11 September 2026. Internal software for your own factory is not a product you place on the market. We help you sort which of your systems fall under it.

Does the software work on the shop floor?

Yes. Screens are built for workstations, tablets and rugged devices, with large targets, barcode scanning instead of typing and clear feedback when a scan is wrong. Where the network is unreliable, the app keeps working and syncs when the connection returns.

Who owns the software and the production data?

Your company. The source code sits in a repository in your own account, the hosting and databases are in your company's name in an EU data region or on your own servers where needed, and every record can be exported.

Get a written quote

Tell us in a few lines what you need. We reply within one working day with a written quote: scope, timeline and a fixed price or an hour estimate. Asking is free and commits you to nothing.

See every price · Contact details

Request a quote